diff --git a/include/EZ-Template/util.hpp b/include/EZ-Template/util.hpp
index 94d9d1d..0f8f552 100644
--- a/include/EZ-Template/util.hpp
+++ b/include/EZ-Template/util.hpp
@@ -26,9 +26,9 @@ extern pros::Controller master;
 namespace ez {
 
 /**
- * Prints our branding all over your pros terminal.
+ * Prints your chooses logo in the terminal
  */
-void ez_template_print();
+void logo_print();
 
 /**
  * Prints to the brain screen in one string.
diff --git a/src/EZ-Template/util.cpp b/src/EZ-Template/util.cpp
index e56fcd1..5158924 100644
--- a/src/EZ-Template/util.cpp
+++ b/src/EZ-Template/util.cpp
@@ -14,18 +14,15 @@ pros::Controller master(pros::E_CONTROLLER_MASTER);
 namespace ez {
 int mode = DISABLE;
 
-void ez_template_print() {
+void logo_print() {
   std::cout << R"(
 
+       _________   ________ ____  __
+      <  <  /__ \ / ____/ // /\ \/ /
+      / // /__/ //___ \/ // /_ \  / 
+     / // // __/____/ /__  __/ / /  
+    /_//_//____/_____/  /_/   /_/  
 
-    _____ ______   _____                    _       _
-   |  ___|___  /  |_   _|                  | |     | |
-   | |__    / /_____| | ___ _ __ ___  _ __ | | __ _| |_ ___
-   |  __|  / /______| |/ _ \ '_ ` _ \| '_ \| |/ _` | __/ _ \
-   | |___./ /___    | |  __/ | | | | | |_) | | (_| | ||  __/
-   \____/\_____/    \_/\___|_| |_| |_| .__/|_|\__,_|\__\___|
-                                     | |
-                                     |_|
 )" << '\n';
 }
 std::string get_last_word(std::string text) {
diff --git a/src/autons.cpp b/src/autons.cpp
index 548c4b8..92056b6 100644
--- a/src/autons.cpp
+++ b/src/autons.cpp
@@ -48,6 +48,11 @@ void default_constants() {
   chassis.pid_angle_behavior_set(ez::shortest);  // Changes the default behavior for turning, this defaults it to the shortest path there
 }
 
+///
+// Custom auton routes
+//
+
+
 ///
 // Drive Example
 ///
diff --git a/src/main.cpp b/src/main.cpp
index 83e72a4..e2f768e 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -12,8 +12,8 @@ ez::Drive chassis(
     {11, 15, 16, 17},  // Right Chassis Ports (negative port will reverse it!)
 
     21,      // IMU Port
-    4.125,   // Wheel Diameter (Remember, 4" wheels without screw holes are actually 4.125!)
-    420.0);  // Wheel RPM = cartridge * (motor gear / wheel gear)
+    3.25,   // Wheel Diameter (Remember, 4" wheels without screw holes are actually 4.125!)
+    360.0);  // Wheel RPM = cartridge * (motor gear / wheel gear)
 
 // Uncomment the trackers you're using here!
 // - `8` and `9` are smart ports (making these negative will reverse the sensor)
@@ -30,8 +30,8 @@ ez::Drive chassis(
  * to keep execution time for this mode under a few seconds.
  */
 void initialize() {
-  // Print our branding over your terminal :D
-  ez::ez_template_print();
+  // Prints your logo in the terminal
+  ez::logo_print();
 
   pros::delay(500);  // Stop the user from doing anything while legacy ports configure
 
@@ -58,7 +58,10 @@ void initialize() {
 
   // Autonomous Selector using LLEMU
   ez::as::auton_selector.autons_add({
-      {"Drive\n\nDrive forward and come back", drive_example},
+      //Custom autonomouse routes go here.
+
+
+      /*{"Drive\n\nDrive forward and come back", drive_example},
       {"Turn\n\nTurn 3 times.", turn_example},
       {"Drive and Turn\n\nDrive forward, turn, come back", drive_and_turn},
       {"Drive and Turn\n\nSlow down during drive", wait_until_change_speed},
@@ -71,7 +74,7 @@ void initialize() {
       {"Pure Pursuit Wait Until\n\nGo to (24, 24) but start running an intake once the robot passes (12, 24)", odom_pure_pursuit_wait_until_example},
       {"Boomerang\n\nGo to (0, 24, 45) then come back to (0, 0, 0)", odom_boomerang_example},
       {"Boomerang Pure Pursuit\n\nGo to (0, 24, 45) on the way to (24, 24) then come back to (0, 0, 0)", odom_boomerang_injected_pure_pursuit_example},
-      {"Measure Offsets\n\nThis will turn the robot a bunch of times and calculate your offsets for your tracking wheels.", measure_offsets},
+      {"Measure Offsets\n\nThis will turn the robot a bunch of times and calculate your offsets for your tracking wheels.", measure_offsets},*/
   });
 
   // Initialize chassis and auton selector
@@ -169,10 +172,10 @@ void ez_screen_task() {
                            1);  // Don't override the top Page line
 
           // Display all trackers that are being used
-          screen_print_tracker(chassis.odom_tracker_left, "l", 4);
-          screen_print_tracker(chassis.odom_tracker_right, "r", 5);
-          screen_print_tracker(chassis.odom_tracker_back, "b", 6);
-          screen_print_tracker(chassis.odom_tracker_front, "f", 7);
+          screen_print_tracker(chassis.odom_tracker_left, "L", 4);
+          screen_print_tracker(chassis.odom_tracker_right, "R", 5);
+          screen_print_tracker(chassis.odom_tracker_back, "B", 6);
+          screen_print_tracker(chassis.odom_tracker_front, "F", 7);
         }
       }
     }
@@ -241,14 +244,16 @@ void ez_template_extras() {
  */
 void opcontrol() {
   // This is preference to what you like to drive on
-  chassis.drive_brake_set(MOTOR_BRAKE_COAST);
+  chassis.drive_brake_set(MOTOR_BRAKE_HOLD);
 
   while (true) {
     // Gives you some extras to make EZ-Template ezier
     ez_template_extras();
 
-    chassis.opcontrol_tank();  // Tank control
-    // chassis.opcontrol_arcade_standard(ez::SPLIT);   // Standard split arcade
+    // Place to call custom functions for driver control
+
+    // chassis.opcontrol_tank();  // Tank control
+    chassis.opcontrol_arcade_standard(ez::SPLIT);   // Standard split arcade
     // chassis.opcontrol_arcade_standard(ez::SINGLE);  // Standard single arcade
     // chassis.opcontrol_arcade_flipped(ez::SPLIT);    // Flipped split arcade
     // chassis.opcontrol_arcade_flipped(ez::SINGLE);   // Flipped single arcade